Billion Electric Company BiPAC 7402VL User Manual
Page 115
VoIP/(802.11g) ADSL2+ Router
Chapter 4: Configuration
VPI and VCI:
Enter the information provided by your ISP.
ATM Class:
The Quality of Service for ATM layer.
Encapsulation method:
Select the encapsulation format, this is provided by your ISP.
Acceptable Frame Type:
Specify what kind of traffic can through this connection, all traffic or only
VLAN tagged.
Filter Type:
Specify the type of ethernet filtering performed by the named bridge interface.
All
Allows all types of ethernet packets through the port.
Ip
Allows only IP/ARP types of ethernet packets through the port.
Pppoe
Allows only PPPoE types of ethernet packets through the port.
PVID for Untagged Frames:
PVID is known as Port VLAN Identifier. When an untagged packet
is received by input port(s), this packet will be tagged with specified PVID.
From the example, VPI and VCI only section need to be filled-in and just leave the rest as is.
Repeat the same procedure by clicking Create
select RFC1483 Bridged fill-in the rest of
PVC 0/34 to 0/39.
Step 3: Setup VLAN Service
Go to Configuration Advanced VLAN Bridge
DefaultVlan
lists all member ports. It is necessary to group specific member ports for each VLAN.
From the example, two VLAN groups are requested: Data and Video.
114