Preparing your dc e510 for use, 1 installing the battery, 2 charging the battery – BenQ DC E510 User Manual

Page 7: Benq dc 5530 user’s manual, Eng lish, Dc e510

Advertising
background image

BenQ DC 5530 User’s Manual

Eng
lish

Preparing Your DC E510 for Use

3

2

P

REPARING

Y

OUR

DC E510

FOR

U

SE

2.1 Installing the Battery

We highly recommend you to use the specified rechargeable
lithium-ion battery to realize the full capability of your digital
still camera. Make sure that the power of the digital still camera
is off before inserting or removing the battery.

1. Open the battery/SD memory card cover (A) and (B).
2. Insert the battery in the correct orientation shown (C).
3. Close the battery/SD memory card cover.

To remove the battery
Open the battery/SD memory card cover and then press the
battery lock lever. The battery will pop out slightly. Remove the
battery.

2.2 Charging the Battery

The state-of-charge of the battery will affect the performance of the
digital still camera. To maximize battery performance and lifetime,
it is recommended that you fully charge the battery using the
optional AC power adapter and then fully discharge it (through
normal use) at least one time. Make sure that the power of the
digital still camera is off and then insert the battery before starting.

1. Insert the conversion adapter into the conversion adapter

terminal of the camera as shown in the illustration (A).

2. Connect one end of the AC power adapter to the DC IN

terminal of the conversion adapter (B).

3. Connect the other end of the AC power adapter to a wall outlet (C).

Charging time differs depending on the ambient temperature and the status of battery.

Notes

The battery will also be charged when connected to a PC using the USB cable.

The digital still camera must be used with the specified AC power adapter. Dam-
age caused by the use of an incorrect adapter is not covered under the warranty.

Always make sure that the digital still camera is off before removing the battery.

The battery may feel warm after it has been charged or immediately after being
used. This is normal and not a malfunction.

When using the digital still camera in cold environments, keep the digital still
camera and its battery warm by holding it inside your jacket or other warm pro-
tective environment.

BAT

TER

Y

A

B

C

Battery lock lever

A

B

C

Advertising