BenQ DC E510 - Manual (Page 8)

BenQ DC 5530 User’s Manual
Eng
lish
Preparing Your DC E510 for Use 4
2.3 Using an AC power adapter
Using an AC power adapter prevents the digital still camera from automatically powering off
while transferring files to your computer.
Perform the steps in the preceding section "Charging the Battery".
2.4 Inserting an SD Memory Card (Optional Accessory)
The digital still camera comes with internal memory, allowing you to record video clips,
captured images, or voice files in the digital still camera. However, you can also expand the
memory capacity by using an optional SD (Secure Digital) memory card so that you can store
more files.
1. Always make sure the digital still camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct orientation as
shown in the illustration.
3. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and
it will eject.
Note
Make sure to use only the AC power adapter specified for the camera. Damage
caused by the use of an incorrect adapter is not covered under the warranty.
Note
•
Be sure to format an SD memory card with this digital still camera before using it.