Beko BD 220 User Manual
Page 20
Setting Handset earpiece Speakerphone Volume
1. Press OK/Menu button. PHONEBOOK is displayed.
2. Press DOWN button. HANDSET is displayed.
3. Press OK/Menu button.
4. Use DOWN button to scroll to the option EAR VOL.
5. Press OK/Menu button. The display will show EAR VOL: X
(X=ear
piece volume level from 1 to 5).
6. Use UP or DOWN button to select your desired level.
7. Press OK/Menu button to confirm and exit to EAR VOL.
8. Press TALK-OFF button to escape to the standby mode.
Alert tones
You can choose to turn on or off of the following tones according to
your preferences.
Key beep
* This alert sounds a tone each time a key is pressed.
1)
Press OK/Menu button. PHONEBOOK is displayed.
2)
Press DOWN button. HANDSET is displayed.
3)
Press OK/Menu button. TONES is displayed.
4)
Press OK/Menu button again. KEYTONE is displayed.
5)
Press OK/Menu button again. ON or OFF is displayed.
6)
Use UP or DOWN to select ON or OFF setting.
7)
Press OK/Menu button to confirm the setting.
8)
Press TALK-OFF button to escape to the
standby mode.
Low battery
1)
Press OK/Menu button. PHONEBOOK is displayed.
2)
Press DOWN button. HANDSET is displayed.
3)
Press OK/Menu button. TONES is displayed.
4)
Press OK/Menu button again. KEYTONE is displayed.
5)
Press DOWN button. LOW BATT is displayed.
6)
Press OK/
Menu button again. ON or OFF is displayed.
7)
Use UP or DOWN to select ON or OFF setting.
8)
Press OK/Menu button to confirm the setting.
9)
Press TALK-OFF button to escape to the standby mode.
Out of range
1)
Press OK/Menu button. PHONEBOOK is displayed.
2)
Press DOWN button. HANDSET is displayed.
3)
Press OK/Menu button. TONES is displayed.
4)
Press OK/Menu button again. KEYTONE is displayed.
5)
Use DOWN button to scroll to RANGE option.
6)
Press OK/Menu button again. ON or OFF is displayed.
7)
Use UP or DOWN to select ON or OFF setting.
8)
Press OK/Menu button to confirm the setting.
9)
Press TALK-OFF to escape to the standby mode.
○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○
- 20 -