Beko BD 220 - Manual (Page 24)

Three way conference call
If you have more than one handset registered to your DECT
phone base, you can have 3-way simulataneous conversation.
You should know the number of the other handset registered to
your DECT phone base.
1. When you engaged in an external (EXT) call, press the
CANCEL/INT followed by the handset number where you
wish to transfer the call. While calling the other handset,
the EXT call is on hold. The called handset need to accept
the INT (internal) call by pressing the TALK-ON button.
2. Once the called handset answer the call, press and hold the
# button to initiate 3-way conference call.
3. If the other handset is no answer or do not want to take the
EXT call, press CANCEL/INT in your handset to return to
the EXT call.
Register a nother HM base to HM Handset
Before registering another HM base to your HM handset, make it
sure that this base is not yet registered to 5 handsets. The base
can only accept 5 handsets registration. The handsets can be
registered with up to 4 bases simultaneously.
- To register another HM base to HM handset, following the
same step of Registering a New Handset in the previous page.
Register Another DECT GAP compatible Base
For registration of another DECT base to your HM handset, you
should know the procedure for registration of this base and the
PIN code. Please refer the User guide of that
Base. Make sure
that this base has not yet reached the maximum handset it can
register. Note : Some
Note : Some Note : Some Note : Some Note : Some special features of HM handset, such special features of HM handset, such special features of HM handset, such special features of HM handset, such special features of HM handset, such
as real time clock, VIP etc may not be available when using as real time clock, VIP etc may not be available when using as real time clock, VIP etc may not be available when using as real time clock, VIP etc may not be available when using as real time clock, VIP etc may not be available when using
different GAP Base DECT phone. different GAP Base DECT phone. different GAP Base DECT phone. different GAP Base DECT phone. different GAP Base DECT phone.
Base Selection
There are two options for use when setting the base selection
method:
Auto: Set the base selection setting to AUTO, so that whenever
the handset-base link is lost or when the system powers up, the
handset searches to connect to any available registered base.
Fixed: By assigning one of the registered bases to be fixed, it
will be the only base to be searched for when the handset-base
link is lost or when the system powers up.
To select base station
1. Press OK/Menu button. PHONEBOOK is displayed.
2. Use DOWN button to scroll to REGISTRATION.
3. Press OK/Menu button. REGISTER is displayed.
4. Use DOWN button to scroll to SEL BASE.
5. Press OK/Menu button.
6. Use
the UP & DOWN button to select the base number
(from 1 to 4) or select AUTO. Note: If you select AUTO, it
will select the base with strongest signal and the first base
it will search. (Note: Base numbers shown with an o in
fornt of the number are those that your handset is
registered with. You can only select a base number with an
o in front of it or the AUTO option.)
7. Press OK/Menu button. The handset will beep and then it
will confirm the SYNC with a beep. If the handset LCD
display base 1 or BASE n (where n is base number) keep
on flashing, it cannot find the base. In this case, set it to
AUTO.
8. Press TALK-OFF button to escape to the standby mode.
○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○
- 24 -