Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 11)

10
INSTALLATION (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect an AC adapter to the DC jack on the
back of the base and to a wall outlet having 120V, 60Hz AC only. The batteries will
work as battery back-up in the event of power failure and will keep all of the func-
tions without interruption. Make sure to only use the supplied adapter, 6V 300mA
with positive center (Z).
This unit can be used on a desk, or other level surface away from excessive heat or
direct sunlight.
1. Set the HI/LO/OFF Ringer switch to HI
or LO to have the ringer sound when
receiving a phone call.
2. Set the TONE/PULSE switch to TONE
or PULSE to match the service provid-
ed on your telephone line. If you are
not sure of your service, please con-
tact your telephone company.
3. DO NOT CONNECT TO THE TELE-
PHONE LINE UNTIL CALLER ID
SETUP IS COMPLETED. Connect the
coiled cord to the handset and base.
Connect the line cord into the jack on
the back of the base.
Line Cord