Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 4)

SAFETY PRECAUTIONS
3
CHANGES IN TELEPHONE COMPANY EQUIPMENT
The telephone company may make changes in its communications facilities, equip-
ment, operations or procedures, where such action is reasonably required and proper
in its business. Should any such changes render the customer’s external equipment
incompatible with the telephone company facilities, the customer shall be given ade-
quate notice to make modifications to maintain uninterrupted service.
GENERAL
The FCC prohibits customer-provided terminal equipment to be connected to party
lines or to be used in conjunction with a coin telephone service.
INSTALLATION
The device is equipped with a USOC RJ11C standard miniature modular jack and is
designed to plug directly into a modular jack.
CONSUMER INFORMATION
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier of US: HU4TE12BBAR550. If requested, this number
must be provided to the telephone company. The applicable jacks (i.e. RJ11C) for this
equipment are provided in the packaging with each piece of approved equipment. The
jacks are certified by Universal Service Order Codes (USOC). A plug and jack used to
connect this equipment to the premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug are provided with this product. They are designed to
be connected to a compatible modular jack that is also compliant. See installation
instructions for details.
The REN is used to determine the number of devices that may be connected to a tele-
phone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local telephone company. [For prod-
ucts approved after July 23, 2001, the REN for this product is part of the product iden-
tifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the