Brick Computer CB-102A - Manual (Page 34)

- 27 -
c. If the connection was successful, the user will see the message:
“Congratulations. The installation of the camera is complete.”
When this window is displayed, click <PC-NVR> to start the PC-NVR program, <Live
View> to view the live video from the connected IP camera, or <X> in the top right corner
of the screen to close the installation window. To run the PC-NVR program, please refer
to the PC-NVR user manual for more information.
Once installation is complete, the Administrator should proceed to the next section
"Accessing the Network Camera" for necessary changes and configurations.