Brick Computer CB-102A - Manual (Page 53)

- 46 -
Wireless
These settings control how a Network Camera interacts with a wireless network. Users can
identify the wireless network and enable wireless encryption.
NOTE
– This function is only available for WCB models.
Basic Settings
Network Name (SSID) - The Service Set Identifier (SSID) is the network name used to identify
the wireless signal emitted from a wireless camera. It is case-sensitive and can be up to 32
characters long.
Wireless devices have a default SSID set by the factory. Brickcom wireless products use
Brickcom as the default name. It is recommended for users to rename their SSID to something
unique in order to distinguish their wireless device from surrounding wireless networks.
NOTE - Be careful when including personal information when naming the SSID as it is
viewable by anyone browsing for wireless networks.