Brother DCP-9010CN - Manual (Page 107)

Troubleshooting and routine maintenance
99
C
Network Configuration List
C
The Network Configuration List is a report
listing the current network configuration
including the network print server settings.
Note
Node name: Node name appears in the
Network Configuration List. The default
node name is “BRNXXXXXXXXXXXX”.
a
Press Menu, 5, 4.
Machine Info.
4.Network Config
b
Press Mono Start or Colour Start.
Checking the remaining life of
parts
C
You can see the machine’s parts life on the
LCD.
a
Press Menu, 5, 5.
Machine Info.
5.Parts Life
b
Press a or b to choose 1.Drum,
2.Belt Unit, 3.PF Kit or
4.Fuser.
Press OK.
c
Press Stop/Exit.
Reset functions
C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.