Brother DCP-9010CN - Manual (Page 32)

Chapter 3
24
Ecology features
3
Toner Save
3
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a
Press Menu, 1, 3, 1.
b
Press a or b to choose On or Off.
Press OK.
c
Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Greyscale images.
Sleep Time
3
The Sleep Time setting can reduce power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives computer data or
makes a copy, the timer will be reset. The
default setting is 005 minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a
Press Menu, 1, 3, 2.
b
Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c
Press Stop/Exit.
LCD Contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 4.
b
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
c
Press Stop/Exit.