Philips EasyClean Aspirador sin bolsa - Manual (Page 10)

telescopic tube
1 Position the nozzle on the floor and hold the tube at an angle of 45°
to the floor.
2 Move the tube lock up or down until the handgrip is at hip level.
3 To connect the tube to a nozzle, press the spring-loaded lock button
on the tube and insert the tube into the nozzle. Fit the spring-loaded
lock button into the opening in the nozzle (‘click’).
- To disconnect the tube from the handgrip, press the spring-loaded lock
button and pull the handgrip out of the tube.
Accessory holder (specific types only)
1 Slide the accessory holder with accessories onto the handgrip
(‘click’).
2 To detach the accessory holder, squeeze the release levers
together (1) and slide the accessory holder off the handgrip (2).
English
10