Philips EasyClean Aspirador sin bolsa - Manual (Page 16)

Cleaning and maintenance of filters
Filter cylinder
Clean the filter cylinder every week.
1 Remove the dust bucket from the appliance, unlock the filter cylinder
lock (1) and lift the filter cylinder out of the filter cylinder case (2).
2 Clean the filter cylinder with the brush supplied. Brush from the top
of the filter cylinder downwards along the ribs.
Only use the brush supplied! Other brushes may damage the filter
cylinder.
3 If you want to wash the filter cylinder, wash it thoroughly with only
water.
Do not use any soap, washing-up liquid or other detergent to clean the
filter cylinder. Let the filter cylinder dry completely before you reinsert it
into the case.
Filter case
1 Remove the filter cylinder case from the dust bucket.
2 If there is any dirt on the inside of the filter cylinder case, empty the
case over a dustbin.
3 If necessary, clean the filter cylinder case with cold tap water and
some washing-up liquid.
4 Unlock the filter cylinder lock and put the filter cylinder back into
the filter cylinder case.
5 Put the filter cylinder case back into the dust bucket and put the
bucket back into the appliance.
Motor protection filter
Clean the motor protection filter once a year.
1 Take the motor protection filter out of the appliance.
2 Tap the dust out of the filter over a dustbin.
If the motor protection filter is very dirty, you can also rinse it with cold tap
water.
Do not use washing-up liquid or any other cleaning agent to clean the
motor protection filter!
Let the filter cylinder dry completely before you reinsert it into the
appliance.
English
16