Belshaw Brothers BXC Smartbake - Manual (Page 12)

Belshaw Bros., Inc.
š 1750 22 nd Ave. S.
š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322-
5425
6 MN-1881EN BXC Smartbake Oven
WARNING
Stand clear of the oven door when opening
to avoid the hot steam and vapor. Hot
steam or vapor may cause severe burns.
WARNING
Always preheat the oven to required
temperature. Do not place product directly
into a cold oven.
7. When the oven is ready, the following screen
will appear (Figure 2-4). Load the product
and press the button corresponding to the
Start option (button 4).
Figure 2-4
8. When the bake time is over, the buzzer will
sound and the screen will read “Bake Over”
(Figure 2-5). Press stop and remove the
product or press button 4 to extend the bake
time by two minutes. The Stop button may
be pressed at any time to stop the bake.
Figure 2-5
9. Upon pressing the Stop button, the screen
will revert to the program screen (Figure 2-
2).
10. To bake in a preheated oven, select a new
program with keys 2 and 3. Then follow
instructions 6-8.
NOTE
During heating, button 1 can be pressed at
any time to check the settings. Press button
1 again or wait 10 seconds to return to the
previous screen.
NOTE
Until the oven is up to the target
temperature, the display will show
“Heating;” then the display will show
“Ready” and the oven will stay at the
target temperature until baking starts or
another program is selected.