Brookstone Talking Blood Pressure Monitor 516328 - Manual (Page 6)

9. Press SET again. The letters M (month) and D (day) flash on
the display.
10. Press USER 1/UP or USER 2/DOWN to select your desired
date format. You can choose to have the date display as
Month/Day or Day/Month.
11. Press SET again. The month or day (depending on the format you
selected in the previous step) flashes on the display.
12. Press USER 1/UP or USER 2/DOWN incrementally until the
correct month or day displays.
Or press and hold USER 1/UP or USER 2/DOWN to move at a
faster rate.
13. Repeat steps 11-12 to finish setting the date.
14. Press SET again. mmHg flashes on the screen.
15. Press USER 1/UP or USER 2/DOWN to select your desired
pressure reading format. You can choose to have your information
display as mmHg (millimeters of mercury) or kPa (kilopascals).
11
MONITOR OPERATION
Setting the Date and Time
Setting the date and time allows a time stamp to be assigned to your
blood pressure measurements.
1. With the unit Off, press and hold SET until 12h flashes on
the display.
2. Press USER 1/UP or USER 2/DOWN to select either
12- or 24-hour format.
3. Press SET again. The hour flashes on the display.
4. Press USER 1/UP or USER 2/DOWN incrementally until the
correct hour displays.
Or press and hold USER 1/UP or USER 2/DOWN to move at a
faster rate.
5. Press SET again. The minutes flash on the display.
6. Press USER 1/UP or USER 2/DOWN incrementally until the
correct minutes display.
Or press and hold USER 1/UP or USER 2/DOWN to move at a
faster rate.
7. Press SET again. The year flashes on the display.
8. Press USER 1/UP or USER 2/DOWN incrementally until the
correct year displays.
Or press and hold USER 1/UP or USER 2/DOWN to move at a
faster rate.
10
516328_INS_T
a
lk
ing Blood P
ressur
e
Monit
o
r
Instruc
tions D
o
c.
Siz
e
:5
"W x 4.75"H
Output at 100% P
rints 1/0 Black
516328_INS_BloodMonitor 4/26/06 1:33 PM Page 11