Brookstone Talking Blood Pressure Monitor 516328 User Manual
Page 8
15
4. Relax your hand and press
.
A voice message will remind you to relax and remain still. The
CUFF and WRIST STRAP will begin to inflate. Once the pressure
reaches the appropriate level, it will slowly deflate until the
measurement results are announced and shown on the display.
To repeat the announcement, press TALK/VOLUME.
Note:
•
Press
at any time to stop the unit.
•
Unless you turn the unit off sooner, it shuts off automatically one
minute after taking a measurement.
Saving Your Blood Pressure Measurements to Memory
You can save blood pressure measurements for up to two individuals.
Each individual can save up to 60 measurements.
To save a measurement, press USER 1/UP
or USER 2/DOWN
after taking a measurement.
To view your measurement history, press USER 1/UP
or
USER 2/DOWN
.
Note:
•
The most recent record is always shown first.
•
Records will be saved when the batteries become exhausted and
are replaced.
14
Deleting Blood Pressure Measurements from the Memory
You can delete the latest measurement only or the entire history.
Deleting the Latest Measurement:
1. Press USER 1/UP
or USER 2/DOWN
to recall the
latest measurement.
2. Press and hold SET until the display shows "dEL ONE".
3. To delete the latest record, press and hold SET. “del done” appears
on the display.
Note: If you decide not to delete the record, press USER 1/UP
twice, and then press
or USER 2/DOWN
once.
Deleting the Entire History:
1. Press USER 1/UP
or USER 2/DOWN
to recall the latest
measurement.
2. Press and hold SET until the display shows "dEL ONE".
3. Press USER 1/UP
. "dEL ALL" appears on the display.
4. To delete the entire history, press and hold SET. “del done” appears
on the display.
Note: If you decide not to delete the record, press USER 1/UP
twice, and then press
or USER 2/DOWN
once.
516328_INS_T
a
lk
ing Blood P
ressur
e
Monit
o
r
Instruc
tions D
o
c.
Siz
e
:5
"W x 4.75"H
Output at 100% P
rints 1/0 Black
516328_INS_BloodMonitor 4/26/06 1:33 PM Page 15