BIXOLON SRP-270 - Manual (Page 12)

Rev. 1.05 - 12 -
SRP-270
3-4 Ribbon Cartridge Installation
Install the ribbon cartridge as shown below.
1) Turn off the printer power switch.
2) Open the printer cover.
3) Before inserting the ribbon cartridge, turn the cartridge knob clockwise in order prevent
the ribbon from tangling.
4) Insert the ribbon cartridge as shown in the image above, and set the ribbon so that is
behind the printer head.
5) To allow the ribbon to move freely within the ribbon cartridge during insertion, turn the
cartridge knob clockwise once more.
※
CAUTION
Only use BIXOLON-approved ribbon cartridges.
Use of an unapproved ribbon cartridge can result in malfunction and/or other issues.
In such cases, warranty service is not available.
Cartridge Knob Printer Cover
Ribbon Cartridge
Auto Cutter