BIXOLON SRP-270 - Manual (Page 13)

Rev. 1.05 - 13 -
SRP-270
3-5 Paper Installation
The paper used varies by printer model.
- SRP-270 A/C: 1-layer paper
- SRP-270 D: 2-layer paper
3-5-1 SRP-270 A/C Model
1) Turn on the printer power.
2) Open the printer cover. (Remove any core of a fully used paper roll if present.)
3) Undo the paper roll, and make sure that the lower edge is cleanly cut.
4) Insert the paper roll as shown below.