Buffalo Technology WLI-TX1-G54 - Manual (Page 2)

2
2
Installation & Configuration
Using Web Interface
Step Ẅ Installing the Wireless
Ethernet Converter-g
Ạ Install the Ethernet Converter to
a computer by connecting one end
of the included Ethernet cable into
an available Ethernet port on your
computer and the other end to the
Ethernet Converter. Ethernet ports
are usually located in the rear of the
computer.
ạ Plug the AC Adapter into a wall
socket or surge protector
(recommended). Connect the AC
Adapter to the Ethernet
Converter.
(Be sure to use the AC Adapter
included with this product or
damage may result.)
Step ẅ Configure the TCP/IP
settings of your computer
Ạ Open your network properties.
Connect Using should be set to use
your active Ethernet NIC Card.
Select Internet Protocol
(TCP/IP).
Click Properties
Windows Setup