Buffalo Technology WLI-TX1-G54 - Manual (Page 5)

5
ả The Ethernet Converter
will scan for available
wireless networks.
Select the SSID (ESS-ID)
of the AirStation or
other Wi-Fi access point
to associate with and
click select.
Ấ If encryption is used, select
the Encrypt button and select
ASCII or HEX and enter the
WEP password.
Click Set to Connect.
Some screens may vary from those shown in this guide, depending on the
operating system used. By accepting the default configuration settings, the Ethernet
Converter Manager should discover and configure properly. For more information
about configuring and operating your Wireless Ethernet Converter, refer to the
User Manual on the Utility CD or the Buffalo Support Web Site:
http://www.buffalotech.com/wireless/support.
The Ethernet Converter is now associated with the Local Area Network.
All settings will be retained by the Ethernet Converter when moved between
different computers and peripherals.