Bryant TSTATBBP2W01 - Manual (Page 6)

During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in
dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
Press the On/Off button.
While holding the On/Off
press the Outside button
for 2 seconds to enter Setup
screens.
Press both On/Off and
Outside buttons as
above to return to
normal operation.
Quick Start Set the Clock and Go
Page 5
The thermostat is preprogrammed from the
factory to operate without the need for further
programming. To optimize the installation
of this thermostat follow the instructions
in the Advanced Setup section.
buttons.
To adjust the
clock or Day use Press
I I2:00
2
Su
OUTSIDE
OUTSIDE
ON/OFF
ON/OFF
ON/OFF