Bryant TSTATBBP2W01 - Manual (Page 7)

The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
OFF indicates the heating
system is turned off.
NOTE: The operating mode of this thermostat may be changed from the
factory default HEAT operation, to COOL operation in the Advanced Setup
Section.
In the following pages Cool operation may be substituted for Heat operation
if the factory default is changed in Advance Setup Step #3.
The Program On operating mode will be bypassed if the factory default is
changed in Advanced Setup, step #4.
Program On will activate the
stored timer operation.
(Morning, Day, Evening, Night)
Select Mode
Basic Operation
Page 6
Press
Press
70
I2:00
69
Su
70
I2:00
70
Su
Day
70
I2:00
Su
OFF
ON/OFF
ON/OFF