Philips Aspirador sin bolsa - Manual (Page 10)

Troubleshooting
1 The suction power is insufficient
Perhaps the dust container is full.
If necessary, empty the dust container.
Perhaps the filters need to be cleaned or replaced.
If necessary, clean or replace the filters.
Perhaps the suction power slide on the handgrip is open.
Close the slide.
Perhaps the electronic suction power control (specific types only) has been set to a low setting.
Set the control to a higher setting.
Perhaps the nozzle, tube or hose is blocked up. (Fig. 31)
To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible)
the other way round. Switch on the vacuum cleaner to force the air through the blocked-up
item in opposite direction.
-
-
-
-
-
-
English 10
4222.003.3343.3.indd 10 16-04-2007 14:39:16