Philips Aspirador sin bolsa User Manual

Page 8

Advertising
background image

2

Press the on/off button on top of the appliance with your foot to switch on the appliance.

If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park

the tube in a convenient position (Fig. 10).
Adjusting suction power

You can adjust the suction power with:

the suction power slide on the handgrip or (Fig. 11)

the electronic suction power control on the vacuum cleaner (specific types only) (Fig. 12).

replacement

Replacing filters

Always unplug the appliance before you replace a filter.
Your vacuum cleaner is equipped with either a Micro Filter or a HEPA Filter.

Micro Filter (specific types only)

Replace the Micro Filter every 6 months.

1

To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 13).

2

Remove the filter holder from the grille.



Remove the old filter from the filter grille.



Put the new filter on the grille and lock it into place with the filter support (Fig. 14).

5

Put the filter grille back into the appliance (1) and turn it clockwise (2) (Fig. 15).

HEPA Filter (specific types only)

Replace the HEPA Filter every 6 months.

1

To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 13).

2

Remove the HEPA Filter (Fig. 16).



Insert a new HEPA Filter.



Put the filter grille back into the appliance (1) and turn it clockwise (2) (Fig. 15).

Cleaning

Always switch off and unplug the appliance before you remove and clean any parts.
Do not clean any part of the vacuum cleaner in the dishwasher. If necessary, clean the parts with

a moist cloth.

1

Clean the appliance with a damp cloth.

Dust container and filter cylinder

For optimal performance, always empty the dust container after use and clean the filter cylinder

regularly.

1

Disconnect the hose from the appliance.

2

Open the cover (Fig. 17).



Remove the dust container from the appliance (Fig. 18).



Remove the lid of the dust container. (Fig. 19)

5

To remove the filter cylinder case, turn it anticlockwise and lift it out of the dust

container. (Fig. 20)

-

-

-

English

8

4222.003.3343.3.indd 8

16-04-2007 14:39:15

Advertising
This manual is related to the following products: