Removing the postureprotect handgrip – Philips ErgoFit Aspirador sin bolsa User Manual

Page 14

Advertising
background image

Problem

Possible cause

Solution

The nozzle, hose or

tube is blocked up.

To remove the obstruction, disconnect the

blocked-up item and connect it (as far as

possible) the other way around. Switch on the

vacuum cleaner to force the air through the

blocked-up item in opposite direction.

The infrared

remote control

does not function.

You have not inserted

the batteries properly

or the batteries are

empty.

Insert the batteries properly or replace them. See

chapter ‘Replacement’.

The appliance does

not function and

the standby light on

the cover of the

appliance flashes.

The dust bucket and/or

the filter cylinder unit

are not installed

properly.

Unplug the appliance. Make sure that the filter

cylinder is assembled properly into the filter

cylinder case (‘click’). Also make sure that the

filter cylinder unit is inserted properly into the

dust bucket (‘click’).

The cover is not closed

properly.

Make sure the cover is closed properly. Put the

plug in the wall socket and try again.

When I use my

vacuum cleaner I

sometimes feel

electric shocks.

Your vacuum cleaner

has built up static

electricity. The lower

the air humidity in the

rooms, the more static

electricity the appliance

builds up.

To reduce this inconvenience, we advise you to

discharge the appliance by frequently holding the

tube against other metal objects in the room (for

example legs of a table or chair, radiator etc.).

To reduce this inconvenience, we advise you to

raise the air humidity level in the room by placing

water in the room. For example, you can hang

containers filled with water from your radiators

or place bowls filled with water on or near your

radiators.

removing the postureprotect handgrip

If you do not find the PostureProtect handgrip comfortable to use, you can consider removing it.

1

Remove the screw cover strip from the PostureProtect handgrip. (Fig. 49)

2

Use a Torx T15 screwdriver to remove the screws of the PostureProtect handgrip (Fig. 50).

3

Remove the PostureProtect handgrip from the tube.

English

14

Advertising
This manual is related to the following products: