Bissell Cleanview Helix 22C1 - Manual (Page 7)

O
peration
7
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Air flow indicator
(select models only)
the air flow indicator tells you when
airflow in the vacuum is reduced due to a clog
in the hose. the indicator will remain green
until the airflow is reduced. When it is fully red,
the airflow is significantly reduced or blocked.
follow the steps on page 12 to clean a clog.
Special tools
your bISSEll Cleanview helix is not only a
powerful carpet and rug vacuum cleaner, it’s
also a versatile above floor vacuum cleaner
when you select one of the special tools.
1. Raise handle to upright position.
2. Grasp the Quick Reach handle and lift hose
wand to separate from suction intake opening.
3. Attach tools by firmly pushing onto vacuum
hose or extension wand.
Crevice tool
Use in tight narrow spaces.
Combination dusting brush/upholstery tool
Two types of cleaning tools are included in one
attachment. Rotate for desired tool. Use brush
side to dust furniture, blinds, books, lamps,
shelves and baseboards.
Extension wand
Use with desired attachment for a longer reach.
Tip:
Hair, string and
small objects
can block the
vacuum hose or
tools. Check
them occasionally
for obstructions.
CaUtIon:
the rotating floor brush continues to rotate
while tools are in use. to reduce the risk of
injury from moving parts, always move the
cleaner with the carrying handle at the back
of the cleaner. always place vacuum cleaner
on floor with handle in upright position when
using tools. never place your fingers under
the cleaner when it is running. never place
powerfoot on furniture or uneven surfaces.
Do not place vacuum cleaner close enough
to objects to pull them into rotating brush.
notICE:
the floor brush will continue to
rotate while you use your vacuum
for above floor cleaning. to prevent
carpet damage, do not lean on the
vacuum or let the powerfoot tilt
forward.