Broan VENTILLATION FAN QTR100 - Manual (Page 4)

Page 
MODEL qtr100
SErVICE PArtS
99043989B
Key No. Part No. Description
1 97016466 Housing
2 97016449 Duct Connector-4”
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375
5 97016932 Wire Panel/Harness Assembly
6 99020284 Blower Wheel
7 99080582 Motor
8 99100491 Isolator (4 req’d)
9 97016468 Motor Plate
10 99250959 Washer #8 (4 req’d)
11 99260558 Nut, Hex Lock #8-32 (4 req’d)
* 97016622 Blower Assembly
(includes key nos. 6 thru 11)
12 97017418 Grille Assembly
(includes key no. 13)
13 99140199 Grille Spring (2 req’d)
14 99111293 Spacer (2 supplied)
15 99420665 Thumbscrew, #8-18 x .375
INStALL GrILLE
7. Attach grille
to housing.
Squeeze grille
springs and insert
them into slots on
each side of hous-
ing.
8. Push grille
against ceil-
ing.
6. Finish ceiling.
Install ceiling material. Cut out around housing.
SErVICE NOtE
To remove Blower Assembly:
Unplug motor (7).
Remove thumbscrew (15)
from motor plate (9) flange.
Find the single tAB on the
motor plate (located next to
the receptacle).
Push up near motor plate
tab while pushing out on
side of housing. Or insert a
straight-blade screwdriver
into slot in housing (next
to tab) and
twist screwdriver.
TAB
Order service parts by “Part No.” - not by “Key No.”