Bradley Smoker AERADA 1000 Series S53-327 DC - Manual (Page 9)

Installation Aerada 1000/1100 Series
Bradley Corporation • 215-1628 Rev. A; EN 08-201 5/21/08 9
FAUCET ADJUSTMENTS
Operating modes and sensor ranges can be adjusted with a manual operation through the infrared sensor.
Faucet adjustment operations apply to all models.
OPERATING MODES
In order to set the operating modes, the faucet needs to be placed into “Manual Setting” mode. At this time, operating modes can be changed within the next 30
minutes.
The following is a functional diagram to show the different settings available for manual faucet adjustment. See detailed instructions on pages 6 through 8.
FUNCTION DIAGRAM OF OPERATING MODES
Water pulses in seconds [s] Legend:
Operating Modes Description
A Cleaning Mode The faucet is inactive for 90 seconds.
B Normal Mode The faucet is activated if it senses a hand presence. This is the default operating mode of the faucet.
C Metering Mode (10 s) The faucet will shut off after 10 seconds regardless of hand presence detected.
D Scrub Mode (60 s) The faucet will shut off 60 seconds after the detection of the last hand presence.
E Scrub Mode (180 s) The faucet will shut off 180 seconds after the detection of the last hand presence.
F Sensor Range Adjustment Change the detection distance of the infrared sensor. The default sensor range is approximately 1” beyond the spout.
G Reset All settings will be reset to original factory settings.
Modes 5 4 1 4 1 4 1 4 1 4 1 Water is off
A - Cleaning Mode Water is on
B - Normal Mode
C - Metering Mode 10 s
D - Scrub Mode 60 s
E - Scrub Mode 180 s
F - Sensor Range Adjustment