Brocade Communications Systems CNA - Manual (Page 123)

Brocade Adapters Administrator’s Guide 105
53-1001256-01
Fibre Channel Security Protocol dialog box (HBA and CNA)
A
Fibre Channel Security Protocol dialog box (HBA and CNA)
The Fibre Channel Security Protocol (FC SP) dialog box enables you to define security
authentication on selected ports.
Opening the dialog box
1. Select a supported device in the device tree.
The following devices support FC-SP: the host, HBA, HBA port, CNA, CEE port, and FCoE port.
2. Select Configure > FC_SP > Authentication Statistics from the Host Connectivity Manager.
Fields and components
Using the dialog box
Refer to the following topics for specific procedures using this dialog box:
• “Configuring security authentication using the GUI (Host and HBA)”
• “Port Statistics dialog box (HBA and CNA)”
• “Polling frequency rate”
• “Resetting statistics”
• “Performance monitoring”
Field Description
Port # The port number (0 or 1) for which you are configuring security
authentication.
Port WWN The world wide name of the port for which you are configuring
security authentication.
Port Name The name of the port (for example, Port 0 or Port 1) for which you are
configuring security authentication.
Authentication Check to enable port security authentication.
Status Indicates whether authentication is used.
Algorithm The configured algorithm. Options include md5, sha1, md5sha1,
shamd5.
Group Indicates the DH group value. DHNULL (group 0) is the only option.
Enable Authentication check box Check to enable FC-SP authentication on the selected device.
CHAP Secret Type the CHAP secret.
Retype Secret Retype the CHAP secret to confirm.