Drvconf – Brocade Communications Systems CNA User Manual
Page 186
168
Brocade Adapters Administrator’s Guide
53-1001256-01
drvconf
B
drvconf
Sets the basic parameters for the driver to function properly.
Note: The drvconf commands are supported on Windows platforms only.
Synopsis
bcu drvconf - -key <key_name> [- -val <value>]
Description
Changes the values for basic Windows registry entry parameters.
NOTE
You can directly change these values by editing the Windows registry entries for these values, or you
can use the drvconf commands for the same purpose.
Possible key name and value ranges are as follows:
•
key = bfa_lun_queue_depth, value range [>0] default = 32
•
key = ioc_auto_recover, value range [0-1] default = 1
•
key = rport_del_timeout, value range [>0] default = 90
•
key = reqq_size, value range [64-8192] default = 512
•
key = rspq_size, value range [64-8192] default = 512
•
key = msix_disable, value range [0-1] default = 1
•
key = pbind_enable, value range [0-1] default = 0
See Also
None