Eng lish, Connecting the power cord – BenQ DV3750 User Manual
Page 15
Setting up Your Display
9
Eng
lish
Connecting Audio Output Signals
Connecting the Power Cord
1. Connect the female end of the AC power cord to the AC input on the display.
2. As shown in the diagram, connect the male end to a wall power outlet.
• The figure above shows the power cord connection. The shape of the physical power cord plug
and socket will differ depending on the location where you purchased the display.
• This product must be operated only from the type of power source indicated on the marking
label (AC 100-240V, 50-60 Hz).
• If the display will not be used for a long period of time, it should be unplugged from the wall
outlet.
DV3750 provides extra audio output terminals
for delivering audio signal to an amplifier or
other audio devices.
Connect the AUDIO OUT L/R terminals on the
display to the signal input terminals of an
amplifier or other audio devices using the AV
cable or equivalent.
Audio (AV) cable
Power cord
Power outlet