BenQ DV3750 - Manual (Page 21)

On-Screen Display (OSD) Menu 15
Eng
lish
Freeze
Freeze motion of screen
image (however, broad-
cast continues).
Use the  and  buttons
on the remote control or
the V
VOL  and V VOL
buttons on the display to
change selection.
• No
• Yes
Backlight
Adjust backlight inten-
sity.
Use the  and  buttons
on the remote control or
the V
VOL  and V VOL 
buttons on the display to
change selection.
• Dark
• Normal
• Bright
Sleep Timer
Set the Sleep timer to
automatically turn off
the display.
Use the  and  buttons
on the remote control or
the V
VOL  and V VOL 
buttons on the display to
change selection.
0, 30, 60, 90, 120, 150, 180 min-
utes
Advanced Feature- Press O OK to enter.
Aspect
Ratio Adjust image aspect
ratio.
Use the  and  buttons
on the remote control or
the V
VOL  and V VOL 
buttons on the display to
change selection.
• F Full Screen - Enlarge the
standard 4:3 video signal to 16:9
full screen video signal. When
the original input video source is
16:9 in ratio (e.g. DVD signal),
no change will occur.
• 4 4:3 Format - Display the
standard 4:3 video signal in the
center of the screen at the ratio
of 4:3. The screen does not
change, but black blocks appears
in the left and right sides of the
screen. When the input video
source is 16:9 in ratio,
deformation will occur on the
screen.
• L Letterbox -Fill the entire 4:3
screen with a 4:3 video signal.
The redundant part on the
upper and bottom of the image
will be removed and the image
will extend vertically and
horizontally to fill the full
screen. When the input video
source is 16:9 in ratio (e.g. DVD
signal), no change will occur.
• A Anamorphic - Fill the entire
screen with a 4:3 video signal.
Some deformations may be
identified on the edge of the
image. When the input video
source is 16:9 in ratio (e.g. DVD
signal), no change will occur.
• R Real - Display the actual size of
the video source without
zooming.
Video
Input
Select video signal input
source for PIP/PBP
function.
Use the  and  buttons
on the remote control or
the V
VOL  and V VOL
buttons on the display to
change selection.
AV1, AV1-S, AV2, AV2-S, AV3,
AV3-S
AV1-S, AV2-S or AV3-S will
appear only when the S-Video
input of AV-1, AV-2 or AV-3 is
connected.