Binatone C350 - Manual (Page 29)

29
• Add Via: by inserting the selected map point as a via, you instruct Binatone Carrera to cross this
y to build a multi-point route in reverse
rks only if a route is already active.
• Remove Via: removes the ‘via point’ near or at the Cursor. The route will be recalculated
immediately excluding the deleted point. This menu point replaces Add Via and is available only if
the Cursor is near or at a via point.
• Continue: add a new destination to be reached after the previous destination. The new
destination replaces the old one, which is now demoted to a via point. This is the way to build
your multi-point route in straight order (when you wish to visit several destinations ‘go to A then to
B’). This menu point is available only if a route is already active.
• Pin: push a coloured pin in the map at the selected point for later use. This pin is visible at all
zoom levels and also appears in the History list together with its exact position. The colour of the
pin is automatically selected by .
• Unpin: remove the pin near or at the Cursor. This menu point replaces Pin and is available only if
the selected point is near or at a pin.
• POI: opens the list of POIs near the selected point. These are the POIs shown in the Popup Info
window. This menu point is only available on the Map screen. If you want to add a new POI at the
cursor, you can do so by tapping Add POI in the bottom left corner. You can also add a new road
safety camera if you tap Add Cam, and set the parameters (type, direction, and speed). If a
camera already exists near the cursor, this button is inactive, and you can change the parameters
of the camera by tapping it in the list.
No. 16 - Current street
This field of the Cockpit screen shows the name or number (as available) of the current street or
road you are driving on.
Tip: Some roads have an alternative name (or number). This is normally shown together with the
primary name in this field. You can hide these alternative names in Map settings.
No. 17 - Travel and Route data
The contents of these three fields are different when cruising (without an active route) or navigating
(following an active route).
While cruising, the fields show the present speed, the current speed limit and the time of day.
While navigating a route, these fields show the estimated time needed to reach the destination
(ETE), the distance to destination, and the estimated arrival time at the destination (ETA) by
default.
You can choose what to display in these three fields during navigation, by going to Advanced
settings / Display Options (Page 86). See the following list for your options. The only restriction is
that you cannot select a value that already appears in another field. The possible field contents are:
• Distance to destination (default value for the left field)
• Time to destination (estimated time en route, default value for the middle field)
• Distance to next via point
• Time to next via point
• Time to next manoeuvre (next route event)
will ask you whether you really want to delete it together with all its via points.
location before the destination of the route. This is the wa
order (when you wish to insert a stopover ‘go to A but first get some fuel at B’ or want to influence
the direction of the route). This menu point wo
Binatone Carrera
MAIN ELEMENTS