Binatone C350 - Manual (Page 39)

39
Use this switch to instruct Binatone Carrera to always open the Map mode in 2D with North-up orientation
Note: You will still have the possibility to rotate and tilt the map, but the map will return to 2D mode
whenever Map mode is started.
3D in Cockpit mode (and track-up orientation)
The normal use of the Cockpit mode is cruising or navigating, when the road lying in front of the
driver is the most important part of the map. It is usually done in a 3D view with the current
direction towards the top of the map. By default Binatone Carrera uses the same look of the map in both
Use this switch to instruct Binatone Carrera to always open the Cockpit mode in 3D with Track-up
for driving purposes.
Note: You will still have the possibility to switch the map to 2D view or north-up orientation, but the
map will return to 3D mode with map rotation whenever Cockpit mode is started.
Zoom in after find
When this switch is turned off, Binatone Carrera will centre the map to the location selected in Find but
object you have searched for. For example in
the case of a city search, the zoom level will show you the whole settlement or at least a significant
part of it around its centre. Selecting a POI, a junction or an exact address will give you a closer
look with only a few streets on the display.
Coordinate display format
Positions are sometimes displayed with their addresses, and sometimes with their coordinates.
This setting lets you choose between displaying coordinates in degrees (dd.dddddd); degrees and
minutes (dd mm.mmm); or degrees, minutes and seconds (dd mm ss.s).
Note: the coordinate display mode is independent from the coordinate input in Find menu. You can
use all three formats freely on the coordinate input screen.
Cockpit screen layout
There are three route data fields at the bottom of the portrait Cockpit screen, or on the left of the
landscape Cockpit screen.
Their content is fixed in Cruise mode (when there is no active route), but for Navigation mode you
can change their content on this screen.
Backlight settings
Here you can set how the display backlight behaves when using Binatone Carrera.
These settings are independent of the settings of the other applications of Pocket PC.
for map browsing purposes.
Map and Cockpit modes.
orientation (automatic map rotation)
will not change the zoom level. If you turn this switch on, Binatone Carrera will also zoom in to the selected
point. The zoom level in this case depends on the type of
MAIN ELEMENTS