BALL Watch Watch - Manual (Page 4)

T
riple Date
The Triple Date function may also be known as the Month, Day, Date feature. The
Trainmaster Racer and limited edition Trainmaster Doctor's Chronograph boast a
new Ball in-house development, the linear Triple Date function. This feature shows the
Month, Day and Date in a row at the 3 o'clock position for ease of use.
To set the functions, unscrew the crown and pull it out to position 1. Turn the crown
clockwise to set Date. To set the Day function, turn the crown counterclockwise.
The Month function is set in the same manner as the Date. By rotating the Date through
all 31 days, the Month wheel will move forward to the next Month.
To prevent damage to the date-switching mechanism, we advise not to manually reset the
Triple Date between 9pm and 3am.
S
ingle-button Chronograph
See instructions for automatic chronograph, with the following changes.
Push-button at 2 o'clock: Start-stop & Reset of chronograph
P1. Upper start/stop/reset control push-button
This push-button enables you to control all chronograph functions. Pressing once starts
the central second hand. Pressing again stops the hand and a third push resets the
chronograph hand to zero again.
Models using the Ball Single-button Chronograph are the Trainmaster Pulsemeter Pro
and the limited edition Trainmaster Doctor's Chronograph.