BALL Watch Watch User Manual
Page 7
C
aring for your BALL watch
Like a car engine, we recommend that you have your mechanical BALL Watch checked,
cleaned and lubricated by us or authorized BALL service center every three to five years.
This regular maintenance will prevent movement wear due to the drying of lubricating
oils.
Your BALL Watch requires a certain amount of care. A few basic recommendations will
help you to ensure its reliability and keep it looking new.
•
Magnetic Fields: The Ball Engineer, Engineer Master & Engineer Hydrocarbon
collections are all equipped with soft iron inner antimagnetic case for improved
resistance. Nevertheless, please avoid placing your watch on refrigerators or
loudspeakers as they generate powerful magnetic fields.
•
Cleaning: Be sure to rinse your watch regularly with fresh water, especially after
it has been in salt water. This will help preserve its appearance and running
condition.
•
Shocks: Although your BALL Watch has been built to withstand shock according
to the highest standard in the industry, extreme impact against this precision
instrument should still be avoided. A strong impact on the winding crown or the
crystal can impair the water resistance.
•
Strap: Our straps are made of finest calf, crocodile or alligator leather and are
protected against humidity. To prolong the life of your leather strap, please avoid
contact with water and dampness to prevent discoloration and deformation.
Should the strap be immersed in salt water, we suggest that you rinse it with fresh
water to prevent further damage. Please also avoid contact with greasy substances
and cosmetic products, as leather is permeable.
If you have any further inquiries on your Ball Watch, please use our
Enquiry Form
or
send e-mail to
.