Replacing the battery – Bayer Contour-TS User Manual
Page 28
Car
e and
Extras
26
Need Help? Call toll free: 1-800-348-8100
The battery should be replaced
when the meter continually
displays or does not turn on.
Your C
ONTOUR
TS Meter uses one
3-volt lithium battery (DL2032 or
CR2032).
Replacing the Battery:
Replacing the Battery
Press fi rmly on the battery cover
and slide in the direction of the
arrow.
NOTE:
After replacing the
battery you will need to
reset the time (see page
16). The date and other
formatting choices do not
need to be reset. Test
results stored in the memory are not erased when the
battery is changed.
To remove the old battery, place
your fi nger under the top of the
battery and pull upward. Grasp
the battery and remove.
Place the new battery into the
battery compartment with the
“+” side up (facing you).
Slide the battery cover back into
place, lining up with the open
slots, and close fi rmly.