BenQ JOYBEE P330 - Manual (Page 21)

21
Manual Repeat Operation
When you enter Manual Repeat, the “A” in will flash.
u A short-press of NEXT or A -B will set the “A” point, and then “B” will
flash.
u A short-press of NEXT or A -B will set the “B” point. Then the segment
between “A” and “B” will play repeatedly.
u After a short-press of LAST or A -B or the set repeating times, the repeat
function will be cycled.
u A short-press of NEXT will enter the cycle of Follow ->
Repeat. For the follow, ADPCM is adopted to record sound. The
recording duration is 10% longer than the repeat. The minimum
recording duration is 1 second.
u A short-press of LAST will return to the Repeat function.
u A short-press of NEXT will enter the cycle of Repeat ->
Compare. The Compare function refers to play the sound recorded
in the Follow function.
u A short-press of LAST will return to Follow -Repeat.
u A short-press of NEXT will begin the settings for the next Repeat.
Note:
In the steps above, hold-on of “Vol+” or “Vol-” will change
the current playing speed. (Except for the WMA format)
In all the steps above, a short-press of MODE will quit the
Repeat interface and return to the Playing interface.