BenQ JOYBEE P330 - Manual (Page 34)

34
Note: You can select Repeat Mode for playing songs in here. The music is still
playing.
It is the same as the interface when playing music.
Repeat Interface
Note: You can perform the repeat function here.
Repeat Operation
u When you enter the Repeat function, the “A” in will flash.
u A short-press of NEXT will set the “A” point, and then “B” will flash.
u A short-press of NEXT will set the “B” point. Then the segment between
“A” and “B” will play repeatedly.
u A short-press of MEXT/LAST will cycle the Repeat function.
Note: In the steps above, hold-on of “Vol+” or “Vol-” will change the
current playing speed.
In all the steps above, a short-press of MODE will quit the
Repeat interface and return to the Playing interface.
In all the steps above, a short-press of PLAY will quit the
Repeat interface and the Playing interface, and return to the
Stop interface.
Tempo Rate Setting Interface
Note: Here, you can set the current playing speed, which will affect both WAV
and AG8 files.