Butler 90317 User Manual
Page 2
SKU 90317 PAGE 2
SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries. Place
product on flat, level surface such as carpet or grass. Concrete could injure people
if Bench is tipped over.
2.
KEEP CHILDREN AWAY FROM PRODUCT DURING ASSEMBLY. Two adults are
better at assembling this product. Do not allow children to use until all hardware in
this product is fully assembled and tightened. Be careful not to pinch fingers
between slats.
3.
DO NOT ATTEMPT TO ASSEMBLE THIS PRODUCT IF UNDER THE INFLU-
ENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to
determine if your judgement or reflexes are impaired while taking drugs. If there is
any doubt, do not attempt to assemble this product.
4.
USE EYE PROTECTION. Wear ANSI approved safety impact goggles when
assembling this products. Goggles are available from Harbor Freight Tools.
5.
PERIODICALLY CHECK. Check Bolts and Nuts to be sure hardware has not
loosened.
6.
STAY ALERT. Watch what you are doing at all times. Use common sense. Do not
assemble this product when you are tired or distracted from the job at hand.
7.
CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect its operation. Replace or repair damaged
or worn parts immediately.
Cast-Iron Frame w/Bronze Finish
Varnished Wooden Slats, Teak Wood
Palm Tree Pattern Bronze and Black Detailing
49-5/8" L X 33-7/8" W X19-3/8" H
79.36 Lbs.
300 Lbs.
Construction
Finish Slats
Design
Overall Dimensions
Weight
Weight Capacity
Item
Discription