Butler 90317 User Manual
Page 3
8.
REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
9.
THIS PRODUCT IS MANUFACTURED OF CAST IRON. Do not force any part of the
assembly and do not overtighten the bolts. Serious damage can occur. Do not stand on this
Bench. Use only for intended purpose. The Park Bench is made for adults. Children
need to be supervised. Injury could occur if Park Bench is overloaded. Use caution!
10.
RECOMMENDED AGE APPROPRIATE USE over 10 years of age unless accompanied by
an adult. Maximum weight for Bench recommended is 300 lbs.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 5) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
We suggest you assemble the unit on a soft surface to avoid damage to the finish.
SKU 90317
Page 3
1.
Assemble the five Seat Slats (#1) to the Cast Iron End Pieces-Right and Left (#2).
Attach with ten Bolts and Nut Pairs (#3). Hand tighten. See Figure 1 & 2.
Note: It may become necessary to enlarge the holes in the End Pieces (#2). Clear
the hole of paint by sliding a bolt through the hole or using a drill with a bit notched
to the hole size.
ASSEMBLY OF BENCH
Figure 1
#1 Seat Slats
#3
#2
Figure 2
#3