Belkin OmniViewIP 5000HQ - Manual (Page 29)

25
OmniView IP 5000 HQ
sections
table of contents 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 21 13
COnfIGUrInG TarGeTs
3. From the list, expand the device type to which the target is connected
and select the actual device the target is connected to; see Figure 29.
Figure 29 Assigning targets to devices
4. Double-click the port number row to which the target is connected.
The name of the target appears in that row.
5. Click “Save”. The changes are saved and the “New Target” page
reappears, showing the assigned IP device and port number;
see Figure 30.
Figure 30 KVM-over-IP Device / Port number
To remove an assigned target from an IP device/KVM switch port,
click .
The assignment is removed.
Figure 31 Removing current KVM port assignment