Belkin OmniViewIP 5000HQ User Manual
Page 62
58
OmniView IP 5000 HQ
COnfIGUrInG aCCess serVICes – InTrODUCTIOn
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
Description – Description of the Access Service - ILO
Url/Host – Type the URL/host of the ILO resource.
Port/application/PuTTy application Path – These fields are only
relevant in SSH mode. The difference between SSH and Web mode is
detailed below.
ssH mode (default)
SSH mode uses an ILO console server. In SSH mode, the PuTTy
application must be installed on all client computers, preferably in the
same path. In the default path %ProgramFiles%\PuTTy (see Figure 70),
the application could be in any drive in the Program Files\PuTTy folder.
See the general notes above about variables.
The PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
In SSH mode, the port number is 22 (default).
Web mode
Web mode uses a remote console with power management options.
In Web mode, there is no need for an executable application. Figure 71
illustrates the ILO fields in Web mode.
Figure 71 ILO – Web mode