Philips SENSEO® Machine à café à dosettes - Manual (Page 25)

5 Put a bowl with a capacity of at least 1500ml
under the spout to collect the descaling
mixture.
6 Press the 1-cup button q and the 2-cup button
qq briefly at the same time to start the
descaling cycle.
, The CALC light and the light ring around the
on/off button starts flashing to indicate that the
descaling cycle has started.
, Hot water comes out of the coffee spout in
intervals. During the descaling cycle, the machine
stops descaling 3 to 4 times to let the descaler
mixture act and to heat up.
Let the machine complete the entire descaling
cycle, which takes 4 to 5 minutes. Do not switch
off the machine during the descaling cycle!
, When all the water in the water reservoir has
been used up, the descaling cycle is finished. The
light ring around the on/off button starts to flash
rapidly.
7 Repeat the descaling procedure (steps 2 to 6)
once. Replace the used pod with another used
pod to filter out the scale residue.
8 Rinse the water reservoir with tap water. Fill
the water reservoir up to the MAX indication
with tap water and repeat steps 3 - 6.
Note: Do not refill the water reservoir with used hot
water or the used descaling mixture.
EnglisH 25