Philips SENSEO® Machine à café à dosettes - Manual (Page 29)

Problem Solution
there is enough water in the water reservoir (i.e.
above the q MIN level if you want to brew 1 cup);
the ambient temperature is not lower than 10°C. If it
is, the machine does not function properly.
Water leaks
from the coffee
machine.
Make sure that:
the water reservoir has not been filled beyond the
MAX level;
the sieve in the centre of the pod holder is not
clogged. If it is, unclog the sieve by holding the pod
holder under a running tap;
the coffee pod has been put properly in the centre
of the pod holder;
the sealing ring has not got stuck under the edge
of the water distribution disc (see figure 1 at the
beginning of this user manual).
the water drops on the worktop are not the result
of placing or removing the water reservoir or
removing used coffee pods.
you do not remove the water reservoir when the
coffee machine is heating up. This may cause water
that normally ends up in the water reservoir to leak
out of the machine.
In all other cases, contact the Philips Consumer Care
Centre in your country.
EnglisH 29