BT PARAGON450 - Manual (Page 8)

Check the dial mode setting
1. The switch on the underside of your BT Paragon 450 should be set to TB
for tone dialling. P is for Pulse dialling which may be required if you are
connected to certain types of switchboard. See page 40-41.
Connect the power cord to the phone
1. Plug the power supply into a mains socket which is near the product and
is easily accessible and switch on.
Your BT Paragon 450 will start up automatically. The screen displays
INITIALISING . When ready, the display shows the time and number of
messages.
Getting started 8
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
HANDSET
LINE
9V DC
T
TB
HEADSET
MODE
P
T
TB
5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 8