BACtrack b70 - Manual (Page 7)

10 11
speCIfICaTIOns
dimensions 4.25 x 1.63 x 0.81 inches
(10.8 x 4.1 x 2.1 cm)
weight 1.4 oz (39.7 grams)
sensor
Technology
BluFire ®
detection range 0.00 – 0.40 %Bac
Test count displays total number of tests performed
Power supply Two aa batteries, not included
Battery life at least 300 tests
warm up Time 10 seconds
response Time 3 seconds
sensor
accuracy
+/- 0.01 %Bac @ 0.02 %Bac
Operating
Temperature
50-104 °F (10-40 °c)
preCauTIOns
wait at least 20 minutes after drinking, eating or smoking before 1.
testing. not observing this waiting period can cause inaccurate
readings, damage the sensor, and void your warranty.
do not blow smoke, food, or liquids into the dual-Flow Breath
2.
chamber as this will damage the sensor.
do not test in areas with strong winds, smoke, or in an area
3.
where a large amount of alcohol is being consumed.
replace the two aa batteries when the screen displays “BaT”.
4.
send your tester in for periodic calibration service as required. 5.
(see calibration).
The BacTrack Breathalyzer is designed to be used in a tem-
6.
perature range of 50-104 °F (10-40 °c). Operation of the unit
in temperature ranges above or below this range may affect the
accuracy of results.
avoid testing in the presence of any substances that contain
7.
methyl alcohol, isopropyl alcohol or acetone. These substances
may interfere with the results of the test.
diabetes, a low caloric intake diet, or certain health conditions
8.
may cause a false positive test when there is an increased keytone
concentration in the breath. consult with a licensed physician to
see if this may apply to you.
do not use the BacTrack as a tool to determine whether you
9.
should operate a motor vehicle or equipment, or perform any
other dangerous act.
do not drink and drive. always have a designated driver when
10.
alcohol is being consumed.