Bush Hog RDTH 84 User Manual
Page 15
4-6 TROUBLESHOOTING
Troubleshooting procedures are listed in Table 4-1 below. If the problem cannot be solved or replacement
parts are necessary, contact your authorized Bush Hog dealer. Please have ready your machine name, model
number, serial number, purchase date and exact cause or description of problem.
Table 4-1 Troubleshooting
PROBLEMPROBABLE CAUSE
REM
EDY
Uneven Cut
Cutter not level side to side
See SECTION III.
or front to rear.
Belt slipping.
Adjust belt per paragraph 4-3.
Worn or bent blade(s).
Replace blade(s).
Streaking or Windrowing
Possible build-up of
Clean cutter.
material under cutter.
Cutter not level.
See SECTION III.
Worn blades.
Replace blades.
Belt slipping.
Adjust belt per paragraph 4-3.
Noisy Cutter
Loose components.
Check all bolts for tightness.
Low oil in gearbox.
Check oil per paragraph 4-2.
Rapid Blade Wear
Blade contacting
Adjust cutting height to
(cutting edge)
ground.
eliminate ground contact.
Rapid Blade
Cutter not being
Set tractor throttle for
Wear
operated at rated PTO speed.
proper PTO speed.
Use lower gear.
Cutter Vibrating
Cutter not being operated
Set tractor throttle for
at rated PTO speed.
proper PTO speed.
Blade(s) bent.
Replace blades.
Foreign object wrapped Remove object.
around spindle or blade.
13