Liebherr ZKes 453 Humidor - Manual (Page 7)

23
GB
Adjusting the humidity
To reduce the humidity
Press the Down button.
To increase the humidity
Press the Up button.
- While you are setting the humidity,
the display will flash.
- About 5 seconds after the button was last pressed, the actual interior humidity will be
displayed.
The humidity can be adjusted between 68% and 75%.
Extremely accurate measurement of humidity requires a complex sensor system such
as the one integrated in your appliance. Separate measurements with hygrometers can
produce humidity values that deviate from those on the humidor display. This can be
the result of inaccurate measurement technology or the positioning of the sensor in the
appliance.
Opening the door or placing fresh cigars in the appliance can affect the humidity level
inside. This can also lead to deviations of the humidity displayed from the reference
setting, without the appliance being defective.
Lighting
The light is integrated into the door
frame and can be switched on and off
by pressing the
Light button.
The LED lights up when the light is
operational.
The brightness of the light can also be adjusted.
• Press and hold the Light button and
at the same time press the humidity
setting buttons to increase or de-
crease the brightness.
Down = darker,
Up = brighter.