BT 3505 - Manual (Page 9)

Set the day and time
Your BT Synergy 3505 automatically adds the day and
time to all recorded messages and memos.
On the handset:
1. Press ✔ twice. The display flashes TAM MENU .
2. Press and you hear “To set day and time press Star, to
hear day and time press Square.”
3. Press . You hear “Please enter new day and time after
the tone”. Enter the day ( = Sun, = Mon, etc.).
Enter the time using the 24 hour clock, e.g.
= 2.15pm. The new day and time is announced.
4. Press twice to return to standby.
To register additional handsets to the base, see page 53.
5
1 4 ᮤ 1
2 1
0
9 Getting started
Range indicator
The symbol on your handset
display indicates when you are in
range of the base. If the symbol
flashes and you hear a warning
beep, you are out of range and will
need to move closer to
the base.
Voice prompts
Your BT Synergy 3505 gives you
voice prompts that help you use the
answer machine. The main menu
announcements are automatically
made via the handset when
is pressed twice.
If the day and time are entered
incorrectly, you will hear
“Incorrect, please set again”.
Enter the correct setting within 15
seconds or the handset will return
to standby. If the day and time are
entered incorrectly 3 times the
handset will return to standby.
Helpline
If you have any difficulties setting
up your BT Synergy 3505, please
call the BT Synergy Helpline on
08706 058 047.
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
5675 BT Synergy 3505 UG [4] 11/11/03 4:02 PM Page 9